1. the Construction Safety Net installation when each rope should be attached to the bracket, the edge of the safety net should be closely attached to the support bracket, and the knot should be made as far as possible to ensure the stout of the knot. .

2. the vertical web surface should be perpendicular to the horizontal plane, and the maximum gap between the vertical edge and the working edge should not exceed 10cm.

3. the safety net flat of the building should not be stretched too tightly. The intermediate distance between the two layers of flat net should not exceed 10m, and the minimum interval between flat net and below surface should not be less than 3m.

4. after the installation of the Building Safety Net is completed, it is necessary to pass the inspection by the security inspector and finish it before it can be used.

5. it is usually necessary to make occasional checks on the safety nets in use, and find that the falling objects are cleaned up in time.